Audio Input

From Patchblocks
Jump to: navigation, search

This block sends the values from the stereo jack audio input, as well as the 2 channel digital input. The values are bipolar and range between -0.5 and +0.5.

This block can be set to run in Control Rate. This useful if using the digital In/Out channels to send simple data flow between two PatchBlocks.

Note that it is possible to use more than one of these blocks in a single patch.


  • Receive from left analogue channel
  • Receive from right analogue channel
  • Receive from digital channel 1
  • Receive from digital channel 2


This block has no outputs.


Usage example forthcoming.