From Patchblocks
Jump to: navigation, search

This block writes MIDI CC messages to the MIDI output.

Whenever there is a change in either the MIDI channel, the controller number or controller value, this block will send a MIDI message with the new data. Controller value should be a value bewteen 0 and 1. It will be multiplied internally to scale it to the 0 - 127 range for MIDI. If MIDI Channel is 0 it will send to all channels.

Refer to the MIDI overview page for general information on MIDI with Patchblocks.


  • Controller Value
  • Controller Number
  • MIDI Channel


This block has no outputs.