From Patchblocks
Jump to: navigation, search

This block is part of the Send/Receive system and must be used in conjunction with a Receive block, reading from the same Bus number

This block writes its Input to one of 16 internal buses selected by the Bus number. Bus numbers are zero-referenced, i.e. between 0 and 15.

The Send/Receive system[edit]

The send/receive system gives you more control over the signal flow of your patch. You can use it to create feedback loops, allowing for things like self-oscillating generators, or recursive delay lines.

You can also use it to send/receive signals across your patch without having cables, although with only 16 possible send/receive pairs, this is not the recommended usage.


  • Input
  • Bus number
    default: 0


This block has no outputs


Usage example forthcoming.